Shenzhen Lux Lighting Co.,Ltd.

Product

Contact

Shenzhen Lux Lighting Co.,Ltd.

Add: Building F, Chendexuan Industrial Park, Lisonglang Village, Guangming New District, Shenzhen, China. Postcode: 518107
Tel: +86-755-33890868 / 33890898 / 33890890 
Fax: +86-755-33890893
Email: sale@luxledchina.com
               

Position: Home > Product > LED Tube Lights
LED Tube Lights

T8 Voice Sensor LED Tube

T8 Voice Sensor LED Tube
Display pictures1 Display pictures2 Display pictures3 Display pictures4 Display pictures5
  • Product Name : T8 Voice Sensor LED Tube,T8 1.2M 22W Voice Sensor LED Tube
  • ProductNo : LX-T8-12-22W
  • Input Voltage : AC100-240V 50-60Hz
  • Color : CW;PW;WW
  • LED Efficiency : 90-110 lm/w
  • Color Rendering Index (CRI) : CW/PW: Ra≥80;WW :Ra≥75
  • Working Temperature : -40 ℃ ~ 50 ℃
  • Lifespan for LED lighting source : > 50,000 hours
  • Certification : CE/RoHS/FCC/UL/KEMA
  • Manufacturer : Shenzhen Lux lighting Co.,Ltd.
Shenzhen Lux Lighting Co.,Ltd T8 Voice Sensor LED Tube,T8 1.2M 22W Voice Sensor LED Tube Manufacturers

Detailed

T8 Voice Sensor LED Tube,T8 1.2M 22W Voice Sensor LED Tube

Product Features:

1, Energy saving:ultra low power,and saves more than 60% energy than traditional incandescent lamp.
2, Environmental protection:no radiation, no mercury or lead, completely recyclable.
3, Super long life span:30,000~50,000 hours, life is 10 times longer than traditional lamp.
4, High quality illuminant:using highlight SMD3014 illuminant, each lamp bead attains 7-8LM.
5, Drives:isolation constant-current supply driver with high efficiency and high-low  pressure to enhance product performance  entirely.
6, Autonomous mold opening to make aluminum alloy extrusion shell ,simple and beautiful looking,scientific and reasonable heat dissipation structure. Scientific light distribution ,uniform illumination.safety in use and easy installation.

Product parameters:

Scope of Application:
Widely used in home interior decoration,commercial and industrial indoor illumination,like office building office, factory,shopping malls,hospital,school,basement parking,corridor aisles,staircase,bill light etc.

Replace the traditional fluorescent lamp wiring diagram:

Single-ended input mode:

LED T8 Tube is used to replace traditional fluorescent lamps can be installed to light after the removal of the starter on the original tube bracket.
The bracket internal ballast removed, more energy-efficient.
Affixed with the label side of the power input, the power to the opposite (short) side.

Double-ended input mode:

LED T8 Tube is used to replace traditional fluorescent lamps can be installed to light after the removal of the starter on the original tube bracket.
The bracket internal ballast removed, more energy-efficient.
Input power cord, respectively, then the two lit the lamp, connected to one will cause the tube short circuit.

 

Chart of package size

No.1 Earl cotton packaging:

No.2 Carton tubepackaging:

Notice for installation:

1, Before installation,cut off power to prevent electric shock,and avoid touching the surface of light while working.
2, The light should be avoid installed in place of heat,hot steam and corrosive gas,so as not to affect their working life.
3, Before installation,make sure that installation position can withstand 10 times the weight of the product.
4, For indoor use only,please pay attention to the waterproofing when using outside.
5, Please install on flat places with no vibration,no rocking and no fire hazard,pay attention to avoid dropping down,colliding and knocking.
6, Please pay attention that when use Tube LED T8 to replace traditional fluorescent,you need to take away the starter, then you can install it into the bracket directly.
7, Removing ballast in the bracket saves much more energy.
8, Jioning the cathode and anode power line to tubes at each side to light up,if you collect up two lines at one side, there will be a short circuit.

Share:
Hits:  UpdateTime:2013-08-16 17:53:31  【Printing】  【Close
:IJվȫ ϲվ ֽ ɳֳ Ǯ Ųʹ˾ ټ IJϷ ֳ k7ֳ